CNCC - Bull Pot anchor replacement
18 November 2026
NEWS

Bull Pot anchor replacement

Anchors replaced in Bull Pot

Bull Pot in Kingsdale is probably one of the most well-visited potholes in our region, offering a short but sweet ropework adventure, with a bit of everything - traverses, rebelays, deviations, climbs, and some very well watered pitches - all only ten minutes walk from the car. There's a lot of action over a very short distance.

It's also a cave that is often used to practice advanced rope techniques underground.

Bull Pot was originally anchored in the 1990s as part of the CNCC's early anchor scheme, with several replacements made around 2015 when IC anchors started to be used in our region. 

Over recent years, we've received reports of anchors in Bull Pot showing a few millimetres of rotational movement. The new BCA guidelines identifies any level of movement as being unacceptable, so we are now working to replace any wobbly anchors, irrespective of how minor the movement. 

Much of this is due to shrinkage of early resins, as reported in our recent article on Sell Gill.

On Sunday 8th November a team of our installers headed to Bull Pot, identifying three defective anchors, including the first deviation of the fourth pitch and one of the two Y-hang anchors at the top of that pitch.

Both of these anchors were efficiently removed and replaced, each taking about 30 minutes.

A further anchor at the bottom of the third pitch showed fracturing of the rock surface and movement (see photo). Many cavers have probably looked at this anchor and pondered on the purpose, as the 2m drop into the stream gully beneath is a very easy climb. What many cavers forget is that anchors may be placed with flood conditions in-mind, and exiting that stream gully could be challenging in high water. This anchor was extracted but was not replaced as we identified a natural spike that could be used instead.

We captured some great shots of the work in progress (all courtesy of Ian Walker).

While we were in the cave, we met a group of student cavers, who highlighted how the existing rigging topo could cause some confusion. This was great feedback! We therefore took the opportunity to audit all of the anchors up to the fourth pitch, redraw the topo to better depict the cave, and update the description for a little more clarity. 

Not a massive job on this occasion - but essential work to keep our anchors safe.

© 2026 Council for the Northern Caving Community.