The CNCC owns numerous items of equipment to support conservation and anchor installation work. These assets are detailed here and most are available to northern cavers to support your projects. Some equipment requires specific training.
Please get in touch with our conservation officer or anchor coordinator if any of this equipment would be of use to you.
12 inch Makita petrol driven cut off saw with spare blades
Qty: 1
Training required
Capstan winch with two drums and anchoring strop and roller
Qty: 1
Training required
Water Pump and 12v battery mounted in peli cases
Qty: 1
Plastic hose and fittings for water pump
Qty: 25m
Makita 18v SDS drill + 2x 4Ah batteries
Qty: 1
Disto DST
Qty: 1
Makita 18v angle grinder 115mm + 2x 5Ah batteries
Qty: 1
Training required
Twin Axel tipper trailer GG
Qty: 1
Training required
Hockey stick tread floatation tyres
Qty: 4
Plastic trugs
Qty: 3
6, 8 & 12mm SDS bits
Qty: Multiple
Tarps
Qty: 3x 2m + 5x 4m
Mixing tray
Qty: 1
Work gloves
Qty: 15
Assorted washing soft brush
Qty: 5
Assorted small brushes and toothbrushes
Qty: Multiple
Sponge
Qty: 8
Diggers buckets b2
Qty: 10
Water sprays, manual
Qty: 4
Mattocks
Qty: 2
Post driver
Qty: 1
Fencing pliers
Qty: 4
Hard point saw
Qty: 2
Wire strainer
Qty: 1
High vis jacket
Anchor puller (custom made)
Qty: 2
Training required
Hydrajaws anchor tester
Qty: 1
Pull-up banners
Qty: 2
Orange barrier (conservation) tape
Qty: 5+
Stainless Steel conservation pins
Qty: 75?
Orange conservation cord
2.2m x 150x34mm shuttering board
Qty: 25
Face masks
Qty: 8
Eye protection
Qty: 5
Twin wall pipe 600mm diameter
Qty: 3m
IC anchors
Training required Fischer EM Resin for anchors
Training required
CNCC-branded table cloth
Qty: 1
Resin gun
Qty: 1
Display boards (eight 600 x 900 mm panels)
Qty: 1
